Universal Overland Rack Accessory Mount: Setup Guide for TC-6125

Start with the rack you already have

Before you add any overland rack accessories, confirm what your rack can accept. The universal overland rack accessory mount is designed to fit the TC-6125 rack, so if that is your rack, you have a direct starting point. If you run a different rack, this mount is not confirmed to fit, and you should look for a rack-specific solution.

This mount is sold individually, which means you can add one at a time as your setup grows. That flexibility is useful, but it also means you need to plan how many mounts you need for the accessories you want to carry.

The mount that fits the TC-6125 rack

• OVERLAND RACK ACCESSORY MOUNT FITS TC-6125: Universal overland rack accessory mount fits TC-6125 rack This is the key compatibility fact: the mount is intended for the TC-6125 rack, so you can skip guesswork if that is your rack model.

  

• OVERLAND RACK ACCESSORY MOUNT FITS TC-6125: Allows multiple cargo configurations You are not locked into one layout; the mount supports different ways to arrange gear on your rack.
• OVERLAND RACK ACCESSORY MOUNT FITS TC-6125: Sold in singles You can buy exactly the number of mounts you need for your accessories, rather than a fixed pack.
• OVERLAND RACK ACCESSORY MOUNT FITS TC-6125: Two-stage powder coat light texture finish in black The finish is designed for durability and a clean look that blends with most rack systems.

How to plan your accessory mounting

The supplied information does not include a step-by-step installation procedure, so the following is a planning sequence based on the mount’s stated compatibility and purpose. Always refer to the manufacturer’s instructions for torque values and specific mounting steps.

1. 1. Inventory your accessories: List the gear you want to mount on the rack—such as recovery boards, fuel cans, or a jack—and note how many separate mounts each item requires. Since the mount is sold in singles, you can order the exact count.
2. 2. Confirm your rack model: Check that your rack is the TC-6125. This mount is listed as fitting that rack; other racks are not confirmed.
3. 3. Choose mounting locations: Decide where each accessory will sit on the rack. The mount allows multiple cargo configurations, so you can experiment with placement before final tightening.
4. 4. Test-fit before loading: With the mount attached, check that accessories sit securely and do not interfere with other rack components. The supplied information does not specify load limits, so avoid overloading and use common sense.
5. 5. Final check: Once everything is in place, re-check fasteners and accessory security. Because installation details are not supplied, consult a professional if you are unsure.

What the mount does not tell you

The supplied product information does not include load ratings, torque specifications, or detailed installation instructions. That means you should not assume a particular weight capacity or tightening sequence. If you need those details, contact the manufacturer or a qualified installer before proceeding.

Also, while the mount is described as universal, it is specifically listed as fitting the TC-6125 rack. Do not assume it will work with other rack systems without confirmation.

Building a flexible overland rack setup

One of the practical benefits of this mount is that it supports multiple cargo configurations. That means you can rearrange accessories for different trips—for example, moving a recovery board to a more accessible spot or shifting a fuel can to balance weight. Because the mount is sold individually, you can start with one or two and add more as your needs change.

Keep in mind that a universal overland rack setup is only as good as its weakest point. Use the mount within its intended purpose and check your accessories regularly, especially after rough terrain.