Terug naar blog
Handleidingen 2026-11-21 Body Armor 4x4 0 weergaven

JK dakdragermontageset: installatiehandleiding

JK dakdragermontageset: installatiehandleiding

Stapsgewijze instructies voor het monteren van de Body Armor 4x4 dakdrager-montageset op uw Jeep Wrangler JK. Behandelt pasvorm, gereedschap en belangrijke tips.

What This Kit Does

The Body Armor 4x4 Jeep Wrangler JK Roof Rack Mount Kit (part JK-6121) is designed to attach a 5160 roof rack to your JK. It fits both 2-door and 4-door models from 2007 to 2018. The kit includes mounting brackets with a two-stage powder coat light texture finish in black, and supports up to 150 lb of cargo on the rack.

Installation Steps

These steps assume you have the JK Roof Rack Mount Kit and a compatible 5160 roof rack. Work on a clean, dry vehicle. Have a socket set and torque wrench ready.

  1. 1. Position the Brackets: Place the mounting brackets on the roof of your JK. For 2-door models, align them with the front and rear hardtop mounting points. For 4-door models, use the additional mounting points along the roof edge. Do not tighten yet.
  2. 2. Attach the Roof Rack: Set the 5160 roof rack onto the brackets. Align the rack's mounting holes with the bracket slots. Insert the provided hardware and hand-tighten all bolts.
  3. 3. Level and Align: Check that the rack sits evenly from front to back and side to side. Adjust bracket positions as needed. A level helps ensure the rack is straight.
  4. 4. Torque All Bolts: Tighten all bolts to the manufacturer's recommended torque specification (not supplied here). Use a torque wrench to avoid over-tightening. Recheck after 50 miles of driving.

Product Facts

  • 2007-2018 JEEP WRANGLER JK ROOF RACK MOUNT KIT: Weight capacity 150 lb This is the maximum cargo weight the mount kit and rack can safely support. Distribute load evenly and do not exceed this limit.
    2007-2018 JEEP WRANGLER JK ROOF RACK MOUNT KIT
    2007-2018 JEEP WRANGLER JK ROOF RACK MOUNT KIT
  • 2007-2018 JEEP WRANGLER JK ROOF RACK MOUNT KIT: Fits both 2-door and 4-door models (2007-2018 Jeep Wrangler JK) One kit works across the entire JK generation, regardless of body style. No need to buy separate parts for different configurations.
  • 2007-2018 JEEP WRANGLER JK ROOF RACK MOUNT KIT: Two-stage powder coat light texture finish in black The finish resists corrosion and scratches from off-road debris. It also blends with most JK roof colors.

Tips for a Clean Install

Before mounting, clean the roof surface where the brackets sit. This prevents grit from scratching the paint. Use blue thread locker on the bolts to reduce vibration loosening. Check the hardware periodically, especially after the first few off-road trips.

The kit does not include a roof rack itself—only the brackets. You'll need a compatible 5160 rack. If you're unsure about fitment, measure your rack's mounting width and compare it to the bracket slots.

Trade-Offs to Consider

The mount kit is designed specifically for the 5160 rack. It may not work with other rack brands without modification. The 150 lb capacity is adequate for camping gear, a spare tire, or light cargo, but not for heavy loads like multiple fuel cans or a rooftop tent. If you need more capacity, look for a heavy-duty rack system.

Installation requires drilling or using existing roof holes? The supplied information does not specify, so check your JK's hardtop or consult the rack's manual. If your hardtop lacks pre-drilled holes, you may need to drill—this is permanent and can affect resale value.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel