Sky Ridge Pike 2 Annex Room: Setup and Weather Tips
By Body Armor 4x4 | Published: 2026-10-31
Category: Tips & Care
Set up your Sky Ridge Pike 2 Annex Room the right way, keep it dry in bad weather, and store it so it lasts. Step-by-step tips for rooftop tent owners.
Quick answer
Set up the annex before you stake the tent, use the floor only when you need it, and manage condensation with ventilation. Store it bone-dry to avoid mildew.
Why the annex floor is optional, and when to skip it
The Sky Ridge Pike 2 Annex Room floor is made of 550gsm PVC-coated waterproof fabric with a heavy-duty zipper, so it can be zipped in or left out. Leaving the floor out lets you step directly into the annex with muddy boots and keeps the interior cleaner for changing clothes. In wet weather, install the floor to keep ground water out, but remember that a sealed floor traps moisture, so ventilate well.
Condensation: the hidden weather problem
Even with waterproof walls, condensation forms when warm, moist air meets cooler surfaces. The annex walls are 420d ripstop polyester oxford with a 2500mm polyurethane coating, which resists rain but does not breathe like a mesh. To reduce condensation, leave a window or door partly open for airflow, and avoid cooking or boiling water inside the annex. A small battery fan can help move air.
Step-by-step setup and care
- Unpack and inspect: Lay out all annex components and check that the walls, floor, and zipper are clean and undamaged. Common mistake: forcing a stuck zipper can tear the fabric; clear debris first. Do this before you climb up to the tent.
- Attach the annex to the tent: Zip or clip the annex walls to the Pike 2 tent base according to the instructions, starting at one corner and working around. Checkpoint: the annex should hang without twisting.
- Decide on the floor: Install the PVC floor if rain is likely or you need a clean changing area; skip it for muddy boots or sandy ground. Common mistake: installing the floor on uneven ground can stress the zipper. Clear the ground of sharp objects before installing the floor.
- Stake and tension the annex: Pull the annex walls taut and stake the corners, but leave slight slack for fabric movement. Checkpoint: over-tensioning can pull seams and reduce waterproofing.
- Ventilate for condensation: Open at least one window or door panel partway, even in light rain, to allow moist air to escape. Common mistake: sealing the annex completely traps condensation that wets gear. Use a small fan in humid conditions.
- Dry and store properly: Before packing, wipe down walls and floor, then let everything air-dry completely. Store loosely in a dry place; never pack wet fabric. Checkpoint: mildew smells mean the fabric was stored damp. Set a reminder to check stored gear every few months.
Product facts
- SKY RIDGE PIKE 2 ANNEX ROOM: Annex walls are 420d ripstop polyester oxford, polyurethane coated for 2500mm waterproofing. This fabric resists rain but is not breathable, so you must manage ventilation to prevent condensation.
SKY RIDGE PIKE 2 ANNEX ROOM - SKY RIDGE PIKE 2 ANNEX ROOM: Annex floor is 550gsm PVC-coated waterproof fabric with a heavy-duty weather-resistant zipper. The floor adds a water barrier but can be removed for easy cleaning or to avoid trapping moisture.
- SKY RIDGE PIKE 2 ANNEX ROOM: Adds over 42 square feet of downstairs living space to the Pike rooftop tent. This extra room gives you a dedicated spot for changing clothes or removing muddy boots without crowding the tent.
